These units are designed to be mounted to a universal flat-bottomed slider for fore and aft movement. It has a square 6.5x6.5 inch flat top with universal mounting holes at each corner. The Post swivels 360° with auto lock forward facing feature. Proper orientation is required for installation. The round base is a standard 8 1/4” 6 hole bolt pattern with 9 1/4” OD.
These units are designed to be mounted to a universal flat-bottomed slider for fore and aft movement. It has a square 6.5x6.5 inch flat top with universal mounting holes at each corner. Proper orientation is required for installation. The round base is a standard 8 1/4” 6 hole bolt pattern with 9 1/4” OD.
These shock-absorbing pedestals are our best seller, and are designed to accept your spider/slider which fits over a 2-7/8” OD standard pedestal tube. This allows 360° swiveling. The round base is a standard 9-¼” OD with a 6-hole bolt pattern. Proper operating range is between 140 -275 lbs total seated weight. Please consult the factory for heavier or other special applications.
The two independently operating shock-absorbing pedestals are designed to function properly even when two occupants of different weights are seated. For benches over 48” or heavy duty applications, three pedestals are recommended. Posts are sold separately or in combination with a custom seat made to the desired seat length, width, color and type of material. Please consult the factory for your special applications. We recommend flat-sided bases for the outside bench posts to minimize the total footprint. Flat-sided bases measure 9-¼” fore and aft and 6” in width.
This Low Profile model is designed with all the same features and technology you have come to expect from the Standard Solo post model 10xx. The advantage of the Low Profile model is that it is at the lowest height possible above the deck or mounted atop a box, with the same travel stroke, strength and swiveling action. Requirements to mount is a 5.5 inch round hole and 5.5 inches of space below the deck or inside the box. Height above is 11 inches.
This Low Profile model is similar as the Standard Solo Low Profile except that it does not swivel. Mount your slider atop the 6.5 x 6.5 inch plate with standard bolt pattern and / or mount your seat directly if it accommodates a universal 5.25” square bolt hole pattern. Height above the deck or box is 11 inches, and requires a 5.5 inch hole and 5.5 inches of space below deck or inside the box. This model is a little more economical than the standard solo version low profile and is a perfect companion as a side mounted seat.